close

Lane Guidance Sign: One Way (Left Arrow)

Lane Guidance Sign: One Way (Left Arrow)
SKU: MR62LRA
Comparable To NMC Product: ...
24" x 18"
...
This material is protected by:

Inform motorists that the direction of the traffic flow moves only to the left.

  • Compliant to MUTCD Section 2B.40
  • ONE WAY (R6-1 or R6-2) signs shall be used to indicate streets or roadways upon which vehicular traffic is allowed to travel in one direction only
  • Post traffic signs to safely direct and regulate the flow of vehicles and pedestrians in and around parking areas, dock areas, and roadways
  • Use signs as specified by the MUTCD (Manual on Uniform Traffic Control Devices), which contains the national standards
  • MUTCD identifies that traffic signs and pavement markings on all roads open to public traffic are to be High-Intensity Prismatic
  • Reflective sheeting is bonded to .080 aluminum and printed with UV-inks to prevent fading

Sorry!

This product has been discontinued and is no longer available.

Please check out similar products from the same category: Lane Control Signs

Shop Now

Or use the search at the top of this page to find a suitable replacement.

Related Products
Product Description

• Heavy-duty Aluminum Signs will not rust
• Reflective sign face provides added visibility in low-light conditions
• UV-resistant inks prevent fading during long-term outdoor use
• Supplied with top and bottom center holes for post- or fence- mounting

Choose from 3 reflective finishing materials:

Engineer-Grade Prismatic (RA)
- Economical prismatic sheeting provides better day and nighttime brightness than traditional beaded Engineer-Grade sheeting. This micro-prismatic retroreflective sheeting is recommended for commercial sign applications as well as non-critical traffic control signs, regulated by the MUTCD. Meets ASTM D 4956 Type I.

High-Intensity Prismatic (HP) - 3X brighter than Engineer-Grade Prismatic. Non-metalized micro-prismatic lens reflective sheeting is effective for daytime, nighttime and artificial light conditions. Provides durability and long-term reflectivity. Meets ASTM D 4956, Type III, Type IV, and Type X.

DG High-Prism (DP) - 10X brighter than Engineer-Grade Prismatic. Provides the highest level of reflectivity and maintains great visibility and reflectivity from far away and at wide angles. Meets ASTM Type IX
Related Documents
Selected Material Details
  • Surface-printed prismatic sheeting (recognized by the Federal Highway Administration) is bonded to aluminum
  • Meets ASTM D4956 Type 1 standards
  • Resists rust and corrosion
  • Withstands extreme temperatures and outdoor environments
  • Rounded corners, 1/4" corner holes, or 3/8" postmount holes
  • Service temperature range: -40° to 250°F
  • Reflective sheeting provides extra visibility during low-light and nighttime conditions when light shines on the surface
  • Excellent choice for regulatory, warning, and work zone signs
skip_next