IIAR Cling-Tite Ammonia Pipe Marker: RV/(blank)/(blank)
Label system, physical state, pressure level with Cling-Tite marker RV/(blank)/(blank).
- Meet the International Institute of Ammonia Refrigeration (IIAR) guidelines for proper marking of pipes as specified in Bulletin No. 114, March 2014
- Cling-Tite pipe marker identifies ammonia refrigeration piping and system components: RV/(blank)/(blank)
- System: Relief Vent; Physical State: (blank); Pressure Level: (blank)
- IIAR pipe markers contain the ammonia name and identify the chemical's system, physical state, pressure level, and directional flow
ASME (ANSI) Pipe Marker: Long Arrow
Mark the directional flow of pipes throughout your facility with a long arrow.
Spanish Pipe Marker: Argón
Identify piping system contents and directional flow for pipes containing argon.
ASME (ANSI) Pipe Marker: Fire Water System
Identify contents and mark the directional flow for pipes used for a fire water system.
ASME (ANSI) Pipe Marker: Nitrous Oxide
Identify contents and mark the directional flow for pipes carrying nitrous oxide.
French Pipe Marker: Retour
Label contents and mark the directional flow of pipes used as a return.
ASME (ANSI) Pipe Marker: Spent Acid
Identify contents and mark the directional flow for pipes carrying spent acid.
Cling-Tite – Wraps 360° around, legend repeated upright and up-side-down to be seen from all angles. Legend is sub-printed on the underside of 7-mil polyester, further protected by 2-mil polyester backing. Resists scratches, abrasions, and chemical splashes. Dirt, dust, and liquids wipe off. Ideal for use on higher temperature pipes with range of -40° to 302°F.
Pipe OD 3/4" - 1 1/4" = Marker Size 1" x 11"
Pipe OD 1 1/2" - 2" = Marker Size 1 1/2" x 15 7/8"
Pipe OD 2 1/2" - 6" = Marker Size 2 1/2" x 23 5/8"
Pipe OD 8" - 10" = Marker Size 3 1/2" x 33 1/2"
Identify Ammonia refrigeration piping and system components.